Yamaha Model 242 Transom Grill Stanchion
Yamaha Model 242 Transom Grill Stanchion
  • Load image into Gallery viewer, Yamaha Model 242 Transom Grill Stanchion
  • Load image into Gallery viewer, Yamaha Model 242 Transom Grill Stanchion

Yamaha Model 242 Transom Grill Stanchion

Regular price
$159.00
Sale price
$159.00
Regular price
$259.00
Sold out
Unit price
per 

*** picture not actual item ***

The JEWLS* Model 242 Transom Grill Stanchion is a stainless steel leg that has been designed and manufactured to support a Magma Grill off of the stern of some 242 Series Yamaha boats.  If your 242 Series has the table mount on the transom, such that when the table leg is installed, it points towards the rear of the boat, this is the stanchion you need.  This has a bit of a longer throw that the 210/212 stanchion, and attempts to put the grill near the edge of the boat so that any grill drippings that may occur don't fall on the surface of the boat.

Fits 2014 and later Yamaha 242 Series Boats, using the V-Shaped Garelick wedge mount (ref Yamaha Mount P/N F3H-U4825-10-00) mounted on the transom.

The stanchion has been designed and hand fabricated by myself, in either a polished or a powder coated finish using 2" OD tube (stainless for polished, or mild steel for powder coated).  The stanchion is TIG welded by hand (vs a very pretty looking machine weld on the Yamaha part) and is polished or powder coated by hand (there may be a few small blemishes) but its a one of a kind.  You won't find these anywhere else.

Each part is test fit with the table mount before being sent out to you.

The stanchion requires one of two mounting methods:

  1. The JEWLS Customs Grill Mount (available for both Magma and Kuuma Grills) fastens to the bottom of the grill, and slips inside the tube.  Fabricated from aluminum, this works well with our stanchions, and allows the grill to rotate on top of the stanchion.
  2. The Magma Pow'rGrip Mount (PN: T10-375) which works awesomely to set the grill at any position you want.  This mount will not work with the factory leg, as the inner diameter is too large. The Magma pole mount works with ID's of up to 1-15/16"  This is the most expensive option, but give the most flexibility.

        Note: I don't have a transom mount, so I can't show a picture of it on that mount!

        MAGMA MOUNT AND GRILL NOT INCLUDED.

        These are made to order - please allow up to two weeks for shipping.

        *JEWLS Customs is the custom parts / fabrication division of aToolCrib and DriWash Solutions, LLC.

        Customer Reviews

        No reviews yet
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)

        Be the first to share your unique experience using the product.