Yamaha Model 240 and 242 Starboard Grill Stanchion
Yamaha Model 240 and 242 Starboard Grill Stanchion
Yamaha Model 240 and 242 Starboard Grill Stanchion
  • Load image into Gallery viewer, Yamaha Model 240 and 242 Starboard Grill Stanchion
  • Load image into Gallery viewer, Yamaha Model 240 and 242 Starboard Grill Stanchion
  • Load image into Gallery viewer, Yamaha Model 240 and 242 Starboard Grill Stanchion

Yamaha Model 240 and 242 Starboard Grill Stanchion

Regular price
$159.00
Sale price
$159.00
Regular price
$259.00
Sold out
Unit price
per 

The JEWLS* Starboard Grill Stanchion is a stainless steel stanchion that has been designed and manufactured to support a Magma Grill off of the rear of the Yamaha 240 and 242 series boats with the mount on the starboard (RH) side.  It puts the grill out over the water so that any grease drippings do not wind up in the boat.

Fits 2014 and later 240 and 242 Series Yamaha Boats, using the V-Shaped Garelick wedge mount (ref Yamaha Mount P/N F3H-U4825-10-00) on the Starboard (RH) side.

The stanchion has been designed and hand fabricated by my self, in either a polished or a brushed finish using 2" OD stainless tube.  The stanchion is TIG welded by hand (vs a very pretty looking machine weld on the Yamaha part) and is polished or brushed by hand (there may be a few small blemishes) but its a one of a kind.  You won't find these anywhere else.

Each part is test fit with the boats V-Shaped mount before being sent to you.

The stanchion requires one of two mounting methods:

  1. The JEWLS Customs Grill Mount (available for both Magma and Kuuma Grills) fastens to the bottom of the grill, and slips inside the tube.  Fabricated from aluminum, this works well with our stanchions, and allows the grill to rotate on top of the stanchion.
  2. The Magma Pow'rGrip Mount (PN: T10-375) which works awesomely to set the grill at any position you want.  This mount will not work with the factory leg, as the inner diameter is too large. The Magma pole mount works with ID's of up to 1-15/16"  This is the most expensive option, but give the most flexibility.

        MAGMA MOUNT AND GRILL NOT INCLUDED.

        These are made to order - please allow up to two weeks for shipping.

        * Please note that the images for the Starboard mount are mirrored from the Port mount (as I don't have a mount on the starboard side!)

        *JEWLS Customs is the custom parts / fabrication division of aToolCrib and DriWash Solutions, LLC.

        Be the first to share your unique experience using the product.